Since you have the 2018 Jeep Wrangler Unlimited that is a 4 door you would need a different Backbone kit of # RRRJKB1 which comes with the Pioneer Platform part # RR68FM that fits your Wrangler. You are correct the part # RRRJKB2 does only fit the 2 door models. view full answer...
When we installed the Draw Tite hitch part # DT78MR that you have on your 2018 Jeep Wrangler JK we found that there was a distance of 5-1/2 inches from the center of it's hitch pin hole out to the furthest point out on the rear spare. The Hollywood Racks E-Bike Rack part # HLY84FR has a distance of 5 inches from the center of it's hitch pin hole to the nearest portion of the rack when folded so it would miss the clearance needed by 1/2 inch.
Now the Swagman Current bike rack part # S64678... view full answer...
We do have an adapter for your Roadmaster Nighthawk Tow Bar # RM-676 to attach to your Demco tabless base plates, and what you need is the following part number:
- Roadmaster Blackhawk All-Terrain, Sterling, or Nighthawk Tow Bar to Demco Base Plate Adapter # RM-034-5 view full answer...
Thank you for all of the insight, it really helps narrow down what we need to be looking for.
I believe you are correct that the problem is on the vehicle wiring. If your 2018 Jeep Wrangler is a JK then you have something similar to the Curt # C55124 which is a simple tee solution but if you have the JL Wrangler then you have something like the Curt # C56407 which has the whole module setup.
With the JK wiring I actually believe the issue might be on your OEM wiring but for the JL the... view full answer...
We can get you set up with the most budget-friendly base plate and tow bar for your 2018 Jeep JK Wrangler, and for this there is one option that you'll want to go with, which is the etrailer-branded set up. For your 2018 JK Wrangler you'll want the following:
- etrailer Invisible Base Plate Kit # e98949
- etrailer SD Non-Binding Tow Bar # e34ZR
Not only is this the best value price-wise, but the tow bar includes integrated safety cables as well as a tilting adjustable head. This means... view full answer...
Yes, the Hollywood Racks Sport Rider SE part # HLY84FR can be used with an extender for which I recommend the Curt Hitch Extender part # C45791 but this will reduce the weight capacity of your trailer hitch by 50%. That said, the Hollywood Racks Sport Rider SE may work on your 2018 Jeep JK Wrangler without an extender depending on tire size and hitch combo.
The Hollywood Racks Sport Rider SE requires no more than 7-1/2" from the face of the trailer hitch out to the rear edge of the spare... view full answer...
We do have replacement magnets part # AA2090206 which you could use in your second door set so that the Aries ActionTrac Motorized Running Boards with Custom Installation Kit # AA73DQ would still power in and out with them on your 2018 Jeep Wrangler view full answer...
I was able to find the diameter of the hole where the tow bar attaches to for the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars # RM-035-1.
As you can see by the accompanying diagram, the holes are 1 inch in diameter.
I have added a link below to a video review for you to check out as well of the Adapter for Jeep D-Ring Bumper Mounts # RM-035-1. view full answer...
There are several manufacturers who have flat tow rated aftermarket bumpers for your 2018 Jeep Wrangler JK Unlimited. Personally I recommend looking at options from either AEV or Quadratec. Be sure the model bumper you select is flat tow rated as not all bumpers are. You will then need either the 3/4" Adapter # RM-035 or 1" Adapter # RM-035-1 depending on the width of the shackle mount. I do recommend using the Locking Pins # IR44FR to secure the Roadmaster Nighthawk All Terrain, Non-Binding... view full answer...
If you're referring to the RoadMaster 4-Wire Straight Cord Kit # RM-98164. You get about 76 inches of wire. This can be used with your hitch and the Sterling All Terrain Tow Bar # RM-576. view full answer...
When it comes to installing any brake controller on your 2018 Jeep JK Wrangler with a factory tow package there will not be a plug that is located underneath the dash. There will be wires that you will have to splice into to activate your controller.
The Curt TriFlex Trailer Brake Controller # C24VV and The Universal Wiring Adapter # C51515 is the controller that I recommend. The controller has 9 sensitivity settings that let you adjust your initial braking power and aggressiveness. It... view full answer...
The panels we sell all come in kits with the solar controller included so you won't be able to get just the panel. The Go Power Portable Solar Panel with Digital Solar Controller - 130 Watt Solar Panel Item # 34282730 is a great choice because it will allow you to park in the shade and place the panel in the sun to allow for max output. It doesn't have MC4 connections but has four different adapters that will run from its solar controller to your battery. There is also an Extension Cable... view full answer...
The Air Lift AirLift 1000 Air Helper Springs for Coil Springs - Rear # AL60817 can utilize spacers to compensate for a lift kit installed on the vehicle. I reached out to my contact at Air Lift and they need the internal diameter of the coil as well as the internal vehicle coil length at resting ride height. If you can get me that info, I can help you get the spacers you need or check with them to see if they recommend a different kit altogether. view full answer...
I would be happy to help!
What you will need to do to get the Roadmaster 2nd Motorhome Kit # RM-98850 installed in your 2022 Mercedes-Benz is first install the LED light in your Sprinter where ever you decide is the best location that is visible while driving, and is preferably in a section of the dash that can easily be removed so you can drill the hole without worrying about what is behind that area. The white wire from the LED will get connected to the white wire of the audio module,... view full answer...
If I understand your setup correctly, then you have the following roof rack system:
Thule Roof Mounted Top Rack System - part # THTB60
Fit Kit for Thule Podium-Style Roof Rack Feet - part # THKIT3101
Rapid Podium Feet for Thule Crossbars - part # TH460R
Thule SquareBar Evo Crossbars - part # TH712500 (not sure about the length, but that doesn't matter much for this application)
If this is not your setup, then let me know and I will adjust the recommendations below for you.
If this is... view full answer...
The braking pressure that the Invisi-Brake System # RM-8700 that you referenced comes from the factory set at is the most universal setting that works for most applications, 60 psi.
You will want to test your setup using the preset setting and compare the stopping power to how the RV stops without a vehicle behind it and adjust as necessary. view full answer...
I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # DT78MR for your 2018 Jeep Wrangler Golden Eagle Edition. This receiver is designed to work with the Mopar off-road style rear bumper that is found on your Golden Eagle as well as Rubicon Editions. It will reuse the 4 bolts that help to secure the rear bumper on your Wrangler. It has the mounting tab welded on for your wiring harness as well. And with your rear bumper being longer it will cover the receiver tube so that it does... view full answer...
I looked up pictures of a 2018 Jeep Wrangler 2dr Golden Eagle with steel bumpers like what you have and the Curt front hitch part # C31433 that you referenced would be the correct fit for it. view full answer...
For your 2018 Jeep Wrangler with the factory front bumper we have base plate kits with removable arms like the Roadmaster EZ4 part # RM-521448-4 which would fit and work well, but none with fixed arms. The fixed arm kits aren't seen much on newer vehicles as that's an older design that Roadmaster is getting away from since most people much prefer the removable arm setups. The removable arm setups are preferred because when not flat towing the front of the vehicle won't have two arms hanging... view full answer...
So there are a number of parts you will need in order to safely flat tow your 2018 Jeep JK Wrangler - base plates, a tow bar, safety chains, tow bar wiring, and a supplemental braking system. You didn't mention if your Jeep has any type of special bumper or off-road bumper, so I'm going to assume you do have the standard factory bumper, which only matters in regards to the correct base plate fit. The parts you will need in order to flat tow your '18 JK Wrangler are the following:
- Base... view full answer...
Go To Results